Caspian Fleet
CASTORO 12
CASTORO 16
BAUTINO BARGES
Caspian seal
Ersai 1
Ersai 2
Ersai 3
Ersai 4
Ersai 400
CASTORO 12
CASTORO 16
BAUTINO BARGES
Caspian seal
Ersai 1
Ersai 2
Ersai 3
Ersai 4
Ersai 400
BAUTINO BARGES
The Bautino 2 and 3 are unmanned and non-self-propelled cargo-barges. Bautino 2 can also be equipped by a deck-crane for construction support, while Bautino 3 is suitably equipped for the transportation of loose-materials.
Both have reduced draft and deck-capacity up to 1300 sqm at 10 Ton/sqm.
Main dimensions are:
Overall length: 105m
Overall width: 16m
Depth: 4.8m
Draught: 2.8
Gross tonnage: 2159 GT
Net Tonnage 648 NT
CASPIAN SEAL
MAIN PARTICULARS
The Damen Stan Tug 1907 is a modern seagoing twin screw tug/workboat for inland water, harbour and coastal service, series' built in steel to standard design.
PRINCIPAL DIMENSIONS
Length o.a. 19.54 m
Beam o.a. 7.74 m
Depth at side (at half length) 3.39 m
Gross Tonnage 96
Displacement approx. (98% consumables) 195 ton(m)
Performances bollard pull ahead 28.4 ton
Speed 11.7 knots
CASTORO 12 SHALLOW WATER PIPE LAY BARGE
PRINCIPAL DIMENSIONS & CAPACITIES
Length of hull: 101 m
Length overall (LOA) including truss: 115 m
Breadth overall: 29.35 m
Depth: 5 m
Operating draught (typical): 1.4 m
Class Notation: LRS X 100 AT Pontoon and RMRS KE II C π Helideck
19.5 m dia. for Super Puma AS332L2
Flag: Kazakhstan
LIFTING EQUIPMENT
Pedestal crane: 35 tons
Boom length: 30 m
Deck mobile crane: 20 tons
PIPELAY EQUIPMENT
Maximum pipe size: 40"
Track type: 15 tons, hydraulic motors
A&R winch: 30 tons
Welding PASSO system
Line-up system, two multi directional rollers
2 bevelling stations
3 welding stations
1 NDT X-ray station
1 repair station
2 field joint stations
POWER GENERATION
Main generators: three @ 800 kw, 380 V, 50 Hz
MOORING SYSTEM
4 double drum anchor winches: MEP AT25000
Max. pull: 35 tons
Polyester rope 60 mm dia., 400 m length
8 anchors: 2.5 tons Delta Flipper type
ACCOMMODATION FACILITIES
Up to 150 people in single, double, 4 bed cabins.
Offices, common spaces and crew recreation facilities
CASTORO 16 BOX TYPE PONTOON
SERVICE
Caspian Sea shallow water service with post-trenching and backfilling functions.
Classification: RMRS *KE R2-RSN Trenching Barge
Flag: Kazakhstan
DIMENSIONS
Length: 135.6 m
Breadth: 27 m
Depth: 6.5 m
Deck loads
- 10 t/sq.m in the middle part and
- 5 t/sq.m in the bow and stern part
DRAFT
Minimum water depth in trenching conditions: 1.5 m
MOORING SYSTEM
4 double drum + 2 single drum anchor winches with 25 t pull and 35 t max. breaking load;
400 m of 60 mm diameter synthetic rope 10 anchors, 2.5 t weight each
POWER GENERATION
3 main diesel generators 800 kW, 400 V, 50 Hz each
BUNKER CAPACITY
Diesel oil storage tank: 425 cu.m
Fresh water tank: 324 cu.m
Dirty water: 525 cu.m
Sewage: 615 cu.m
Ballast tank: 3,968 cu.m
NAVIGATION AND COMMUNICATION
Telephone satellite communication VSAT 2 DGPS, Radar, Radio, Gyrocompass, Echosounder
CREW FACILITIES
Max. 132 persons in double ad quad cabin arrangement /full AC
Canteen for 48 seats
LIFTING FACILITIES
Main pedestral crane capacity: 80 ton @ 25 m
Aux pedestral crane capacity: 35 ton @ 15 m
TRENCHING SYSTEM
7 diesel hydraulic power units 850 kW each
1 electro hydraulic power unit 1,100 kW
TRENCHING EQUIPMENT
1 pulling unit, 1 trenching sled
1 suction unit, 1 remedial machine
Emergency Suction Unit (UDM)
Backfilling arm with vertical and horizontal movements 9 Buoys
MONITORING SYSTEM
2 stations for pipe burial depth monitoring, 2 stations measuring mixture flow rate DGPS for machine positioning
OTHER FACILITIES
Water maker (fresh water generator): Tasman Sea 72 m3 / day
Ersai 1 Crane Barge
Main information
Hull length : 139.84 m
Hull width : 42.0 m
Barge tonnage : 7,300 t
The barge is fitted with 250 Ton crawler crane and is suitably equipped for S-type pipe-laying.
ERSAI 2 CRANE BARGE
Classification: RMRS KE* pontoon for technological service
DIMENSIONS
Length: 59.77 m
Breadth: 16.48 m
Moulded depth: 3.30 m
Draught: 2.59 m
Gross tonnage: 824 t
Net tonnage: 247 t
HULL
Year of building: 1985
Twelve watertight bulkheads, one continuous deck
TANK CAPACITIES
Fresh water: 11 cu.m
Ballast: 650 cu.m
Diesel oil: 37 cu.m
Sewage: 35 cu.m
Dirty oil: 1.9 cu.m
MACHINERY
Engines for propulsion: two Cummins NTA 885 diesel engines
Power: 2 x 360 HP
Main engine rated speed: 1,800 rpm
PROPELLERS
Two Jastram RP06 rudder propellers 1,800 rev/min.
ELECTRIC INSTALLATION
One MSB 380/220V 50Hz/24V
GENERATORS
One 320 KVA main generator and one 100 KVA aux. generator
OFFICE SPACE AND FACILITIES
One 40’ canteen container
Two 20’ wheelhouse/office containers
One 20’ workshop container
One store room
One battery room
Storage space and facilities: 260 sq.m
Workshop space and facilities: 14 sq.m
LIFTING EQUIPMENT
One Demag Crane TC1000S; max. capacity 200 t
MOORING EQUIPMENT
Four hydraulic winches, 5 t pulling with powerpack in 10’ container
ERSAI 3 WORKSHOP STORAGE BARGE
Classification: Class: Germanischer Lloyd – 100 A5 K E “Special purpose ship” RMRS – Special purpose ship.
DIMENSIONS AND TONNAGE
Length overall: 68.27 m
Length between perpendiculars: 63.30 m
Breadth extreme: 12.40 m
Draught: 2.50 m
Height to main deck: 3.75 m
Gross tonnage: 1,963 t
Net tonnage: 814 t
Deadweight: 223 t
AUXILIARY EQUIPMENT AND CAPACITIES
Promenade decks: office space (52 people), meeting room, library and pantry minibar
Main deck: storage (420 sq.m) and workshop (200 sq.m)
People on board: max. 75
Crew: 6
Satellite antenna
Network with internet connection for all desks
Server room
Radio room
TANK CAPACITIES
Fresh water: 42 cu.m
Ballast: 169 cu.m
Diesel oil: 79 cu.m
Black and grey water: 34 cu.m
Dirty water: 90 cu.m
MACHINERY
Two main diesel engines for propulsion:
- Power: 2 x 600 kW Deutz MWN
- Motoren-Werke
- Mannheim AG
- Main engine rated speed: 1,650 rev/min.
8 cylinder diameter/stroke: 170 mm/195 mm
Propellers: 2 propellers
Type: controllable pitch propeller, aft
Propeller revolutions: 412 rev/min.
Ship speed: 12 knots
1 fixed pitch propeller Shottel 331 kW, forward
Generators:
- 1 main generator: 320 kW - 380/50 Hz
- 1 main generator: 240 kW - 380/50 Hz
STORAGE AND WORKSHOP
Storage space and facilities:
- Covered (cold) storage: 240 sq.m
- Paint storage: 31 sq.m
- Heated storage: 150 sq.m
Storage capacity: about 200 t
Workshop space:
Workshop area: 192 sq.m
WORKSHOP FACILITIES
Drill machine
Lathe machine
Mechanical hacksaw
Grinding machine
Hydraulic press
LIFTING EQUIPMENT
1 pedestal crane capacity 5 t @ 12mon exposed deck at stern
1 overhead crane of 3 t capacity
1 electrical monorail hoist of 2 t capacity
FACILITIES FOR EXTERNAL USERS
2 diesel generators 450 kVA, 50 Hz
1 air compressor diesel driven (10.5 cu.m/min., 12 bar)
Firefighting equipment, safety systems and lifesaving appliances as per marine requirements and SOLHS.
ERSAI 4 WORKSHOP STORAGE BARGE
HULL
Year of building: 1989
Shipyard: North East Shipbuilders - Sunderland, U.K.
Conversion year: 2008
Watertight bulkhead: 8
CLASSIFICATION
Class: RMRS
Class notation: KE 1 - Berth Connected Barge
MAIN DIMENSIONS AND TONNAGE
Length o.a.: 95.80 m
Length between pp: 90.00 m
Breadth o.a.: 15.02 m
Draft: 3.64 m
Gross tonnage: 5,023 t
Net tonnage: 1,506 t
Propulsion: not self-propelled
SHIP CAPACITIES
Deck “A”: office space - for 95 people
Weather deck: workshop (280 sq.m) and storage (295 sq.m)
Main deck: storage (790 sq.m)
Meeting room, library and pantry minibar, server room, radio room, satellite antenna
Network with internet connection for all desks
TANK CAPACITIES
Fuel oil: 286 cu.m
Fresh water: 217 cu.m
Drain: 242 cu.m
Ballast water: 226 cu.m
Dirty water: 320 cu.m
MACHINERY
DDGG set ship use
Cummins NTD 855-G2:
- • 2 x 260 kW
- • 1 x 275 kW
- • 1 x 275 kW
ELECTRIC INSTALLATION
1plant 440V/60 Hz
LIFTING EQUIPMENT
1 pedestal crane capacity 5 t @ 12 m to be installed on exposed deck at stern
1 overhead crane of 3 t capacity
1 electrical loose warehouse forklift of 3 t capacity
1 monorail electrical hoist 3 t capacity
WORKSHOP SPACE AND FACILITIES
Drill machine
Lathe machine
Mechanical hacksaw
Grinding machine
Hydraulic press
Roller seating for pipe
EQUIPMENT FOR EXTERNAL USERS
1 air compressor containerized of 10,500 l/min.
1 main switchboard for external users
2 x 260 kW DDGG
1 x 275 kW DG
Fine fighting equipment and safety systems as per marine requirements
Lifesaving appliances as per SOLAS
ERSAI 400 ACCOMMODATION BARGE
Classification: RMRS (Russian Maritime Register of Shipping) and ABS (American Bureau of Shipping).
Flag: Kazakhstan
HULL TYPE
Ship shaped barge with side blisters – ice class notation A0
MAIN DIMENSIONS
Hull length 111.00 m
Hull width 16.20 m
Depth 3.75 m
Load line displacement 3,600 t
Freeboard draught 2.8 m
MOORING SYSTEM
1 anchor winch 20 t pull capacity with 2 x 10 t capstans at stern
AUXILIARY EQUIPMENT & CAPACITIES
3 main diesel generators power: 750 kw, 380 V, 50 Hz each
Fuel oil storage tank: 184 cu.m
Lube oil storage tank: 4 cu.m
Oil water tank: 8 cu.m
Sludge tank: 11 cu.m
Fresh water storage tank: 182 cu.m
Sewage storage tank: 390 cu.m
Reverse osmosis fresh water maker rate 3 x 50 t/day
High fog fire protection system for engine room
The barge is complying with Marpol 73/78 latest edition
ACCOMMODATION FACILITIES
Living quarter fully air conditioned for 396 persons
Mess room for 200 persons.
5 offices
Temporary refuge space for full complement, endurance 2 hours
LIFTING FACILITIES
2 x 10 t capacity revolving cranes at side
1 x 3 t revolving crane at stern
HELIDECK
Aluminium made and suitable for Super Puma AS 332 L2 helicopter
tough projects in safe hands
